-31%
,

TVLogic 7 F-7H FHD HDR Field Monitor


  • 7″, 1920 x 1080, 3G-SDI and HDMI Monitor
  • 3600 cd/m² Maximum Brightness
  • Waveform / Vectorscope
  • 160° Viewing Angle
  • HDR and 3D-LUT Support
  • On-Screen and Rear Tally
  • Multiple 1/4″-20 Mounting Holes
  • Optional Battery Plates

$1,000.00 $1,450.00

The 7″ F-7H FHD HDR Field Monitor is well suited for work in the field, on a camera, or in a studio. The IPS panel features a 1920 x 1080 resolution with 160° viewing angle.

The F-7H supports 3G-SDI as well as HDMI 1.3, and it can cross-convert between SDI and HDMI. The 3600 cd/m² brightness and 1200:1 contrast ratio provide a bright clear image viewable in daylight without a hood. The screen supports REC 709, but can also display HDR imagery supporting HLG, PQ, and SLOG3. It features a top-mounted menu, assignable functions buttons, and a selection knob, leaving the front of the screen uncluttered.

The built-in on-screen menu display allows you to select and adjust the monitor’s controls and on-screen markers, load and save 3D LUTs, and select from SDR to HDR. It displays the tally signal through the power connection and displays tally on both the front and rear of the monitor. Threaded 1/4″-20 mounting holes are built into the top, bottom, left, and right sides, allowing you to mount it using an optional accessory arm, or to your camera using the included cold shoe mounting adapter. Optionally available battery plates expand the power options of the monitor.

  • Audio level meter display
  • Blue-only/mono
  • Focus Assist
  • H/V delay
  • H/V flip
  • Waveform and vectorscope
  • Key lock
  • Luma(Y’) zone check
  • Marker
  • Max brightness on/off
  • Range Error
  • Timecode display
  • 1-to-1 pixel zoom
  • ARRI camera metadata support
  • Anamorphic de-squeeze
  • HDMI to SDI conversion
  • SDI to HDMI conversion
  • Internal pattern generator (0~100% gray/color bars + pluge)
  • Center marker, safety area marker, marker mat, marker size, fit marker, thickness adjustment function

3D LUT Support

The monitor internally stores up to three 3DLUTs. You can also load from a list of available 3DLUT files. The monitor supports the following formats: Cube, GV Lut, Quantel, DaVinci, and AssScratch. Once saved, the 3DLUT is retained even when the power is turned off.

HDR

The F-7H supports HDR display using EOTF in PQ, HLG, or SLOG3. In the Auto mode, the HDR image is converted within the range of set peak luminance and black level. In the Off mode, the video will clip.

Marker

Available Marker types are Off, 16:9, 4:3, 4:3, On Air, 15:9, 14:9, 13:9, 1.85:1, 2.35:1, 1.85:1, 4:3, and user-definable top/bottom and left/right.

Aspect Ratio

You can adjust the aspect ratio of the monitor, regardless of the original aspect ratio of the input signal. Aspect modes are changed as follow: 16:9, 4:3, 2.35:1, 1.85:1, 15:9, 16:10], Anamorphic 1.3x, Anamorphic 1.5x, Anamorphic 2.0x, and Auto. Auto mode enables the aspect ratio of the output signal to be synchronized to the original aspect ratio of the input signal.

Tally

The F-7H supports on-screen and rear tally. Tally signals are sent through the 3-pin connector.

On-Screen Display

You can select the type, then adjust the size and transparency of the waveform and vectorscope.

Optional Battery Plates

Optional battery plates are available to power your monitor from:

  • L-series
  • Cannon BP series
  • Panasonic CGA/VB series
  • Sony BP-U series
  • LP-E6
  • V-mount
  • Gold mount

TVLogic F-7H Specs

Display
Panel Type IPS-Type LCD
Display Size 7.0″ / 17.8 cm
Aspect Ratio 16:9
Viewing Angle Horizontal: 160°
Vertical: 160°
Touchscreen No
Maximum Brightness 3600 cd/m2
Contrast Ratio 1200:1
Dot Pitch 0.078 x 0.078 mm
Bit Depth / Color Support 8-Bit (16.7 Million Colors)
Pixels Per Inch (ppi) 314 ppi
Real-Time LUT Monitoring SDR
Image Controls Anamorphic De-Squeeze, Blue Only, Color Temperature Selection, H/V Delay, Image Flip, Scaling, Vectorscope, Waveform
I/O
Video 1 x BNC (3G-SDI) Input
1 x BNC (3G-SDI) Output
1 x HDMI Type A (HDMI 1.3) Input
1 x HDMI Type A (HDMI 1.3) Output
Embedded Audio SDI
HDMI
Audio 1 x 1/8″ / 3.5 mm Line Input
1 x 1/8″ / 3.5 mm Headphone Output
Built-In Speaker 1
Other I/O 1 x Tally (Proprietary)
Card Slot None
Format Support
Video Format SDI (10-Bit 4:2:2 YCC)
1080p: 60/59.94/50
1080PsF: 30/29.97/25/24
1080i: 60/59.94/50
720p: 60/59.94/50
576i: 50
480i: 59.94
SDI (10/12-Bit 4:4:4 RGB, YCC)
1080p: 30/29.97/25/24/23.98
1080PsF: 30/29.97/25/24/23.98
HDMI (8/10/12-Bit 4:4:4 RGB, YCC)
1080p: 60/59.94/50/30/29.97/25/24/23.98
1080i: 60/59.94/50
720p: 60/59.94/50
576p: 50
576i: 50
480p: 60
480i: 60
HDMI (8/10/12-Bit 4:2:2)
1080p: 60/59.94/50/30/29.97/25/24/23.98
1080i: 60/59.94/50
720p: 60/59.94/50
576p: 50
576i: 50
480p: 60
480i: 60
PC Resolutions 1920 x 1080 at 60 Hz
1280 x 1024 at 60 Hz
1280 x 800 at 60 Hz
1280 x 768 at 60 Hz
1024 x 768 at 60/70/75 Hz
800 x 600 at 60/75 Hz
640 x 480 at 60/75 Hz
640 x 400 at 70 Hz
Video Signal Conversion SDI to HDMI

HDMI to SDI

Power
Battery Type None
Power Consumption 19 W
Mounting
Mounting 8 x 1/4″-20 Female
Environmental
Operating Temperature 32 to 104°F / 0 to 40°C
Storage Temperature -4 to 140°F / -20 to 60°C
General
Dimensions 8.3 x 4.9 x 1.1″ / 211 x 125 x 28.3 mm
Weight 1.76 lb / 0.8 kg
Warranty Length Limited 1-Year Warranty
Packaging Info
Package Weight 2.35 lb
Box Dimensions (LxWxH) 11.6 x 6.4 x 3.4″

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “TVLogic 7 F-7H FHD HDR Field Monitor”

There are no reviews yet.

You may also like…

Translate »